.. _headlabel-refx-data-105:

Data 105 (Parking-fence Status)
===============================

This combined data is some status information about Parking-fence. Please refer to the :ref:`AT@APF <headlabel-refx-cmd-apf>` command for more information.

The frame format of the Data **105** unit is as follows:

.. code-block:: none

   For example (Total 16 bytes):
   69 0E 01 01 00 00 0B B8 F9 20 A8 E1 FF 2D C0 96

.. tabularcolumns:: |p{3.2em}|p{10.2em}|p{5.8em}|p{15em}|p{4.8em}|

.. table::
   :width: 100%
   :widths: auto

   +---------+--------------------------------------------+---------------+---------------------------------------------+--------------+
   | Parts   | Fields                                     | Length (Byte) | Range/Format                                | Default      |
   +=========+============================================+===============+=============================================+==============+
   | ID      | Data ID                                    | 1             | 69H (105)                                   | 69H (105)    |
   +---------+--------------------------------------------+---------------+---------------------------------------------+--------------+
   | Length  | Data Length                                | 1             | 00H or 0EH                                  |              |
   +---------+--------------------------------------------+---------------+---------------------------------------------+--------------+
   | Content | `Mode`                                     | 1             | 00H, 01H, 02H                               |              |
   +         +--------------------------------------------+---------------+---------------------------------------------+--------------+
   |         | `Status`                                   | 1             | 00H, 01H, 02H                               |              |
   +         +--------------------------------------------+---------------+---------------------------------------------+--------------+
   |         | `Radius`                                   | 4             | 00000064H-000186A0H (meters)                |              |
   +         +--------------------------------------------+---------------+---------------------------------------------+--------------+
   |         | `Longitude`                                | 4             |                                             |              |
   +         +--------------------------------------------+---------------+---------------------------------------------+--------------+
   |         | `Latitude`                                 | 4             |                                             |              |
   +---------+--------------------------------------------+---------------+---------------------------------------------+--------------+

- `Mode`

  Indicates the working mode of Parking-fence function. Corresponds to the 'Mode' parameter of the :ref:`AT@APF <headlabel-refx-cmd-apf>` command.

  - **00H** - Disable.
  - **01H** - Enable (Automatically triggered always).
  - **02H** - Enable (Automatically triggered once).

- `Status`

  Indicates the current status of the Parking-fence.

  - **00H** - No Parking-fence is generated.
  - **01H** - The Parking-fence is generated (the vehicle is inside).
  - **02H** - The Parking-fence is canceled (the vehicle is outside).

- `Radius`

  The radius of the circular Parking-fence region. The value is configured by the 'Radius' parameter of the :ref:`AT@APF <headlabel-refx-cmd-apf>` command.

  Expressed as a 32-bit unsigned integer and the unit is meter.

- `Longitude`

  The longitude is converted to an integer with 6 implicit decimals and this integer is reported in HEX format; if its value is negative, it is represented in 2's complement format. For the converted longitude, a positive number indicates the east longitude and a negative number indicates the west longitude.

  For example, 073C46FFH (i.e., 121390847) means longitude 121.390847 degrees, and F920A8E1H (i.e., -115300127) means longitude -115.300127 degrees.

- `Latitude`

  The latitude is converted to an integer with 6 implicit decimals and this integer is reported in HEX format; if its value is negative, it is represented in 2's complement format. For the converted latitude, a positive number indicates the north latitude and a negative number indicates the south latitude.

  For example, 01DB8857H (i.e., 31164503) means latitude 31.164503 degrees, and FF2DC096H (i.e., -13778794) means latitude -13.778794 degrees.